Electrical steel, also known as silicon steel sheet, is a soft magnetic alloy of silicon and iron with extremely low carbon content. The efficiency of the vast number of motors, transformers, and generators produced globally each year directly depends on the quality of electrical steel. Simply put, without electrical steel, there would be no modern […]
Electrical steel – Basic material for modern energy economy Lire la suite »
Home » Carbon Alloy Steel » Cold Rolled Grain Oriented Electrical Steel Cold Rolled Grain Oriented Electrical Steel Thickness: 0.23 mm, 0.27 mm, 0.30 mm, 0.35 mm, or as required Width: 750 mm, 900 mm, 1000 mm, etc. Standard: GB/T, ASTM, EN, JIS Product Introduce Cold Rolled Grain Oriented Electrical Steel, abbreviated as CRGO, also
Cold Rolled Grain Oriented Electrical Steel Lire la suite »
Home » Composite Steel Plate » ACM Aluminum Composite Panel ACM Aluminum Composite Panel Aluminum layer: 0.06-0.5mm Thickness: 3mm, 4mm, 6mm (as requirement) Color: RAL Color or customer’s requirement Product Introduce Aluminum Composite Panel (ACP)， Also known as aluminum composite material (ACM), it is a new type of building decoration material composed of two layers of
ACM Aluminum Composite Panel Lire la suite »
Home » Carbon Alloy Steel » Hot rolled H-Section steel Hot rolled H-Section steel Length: 6m, 12m, or as required Material: Q235B, Q355B, A36, A992, A572 Gr.50, etc Standard: GB/T, ASTM, EN, JIS Product Introduce Hot rolled H-beam is an economical structural steel profile with wide flanges, high lateral stiffness, and strong bending resistance produced
Hot rolled H-Section steel Lire la suite »
Home » Carbon Alloy Steel » Q355B welded H beam Q355B welded H beam length: 1m ~ 12m Thickness: 0.5 ~ 30mm Design Style: Customizable Product Introduce Q355B welded H beam is a type of structural steel beam manufactured by welding steel plates into an “H” shape. It is made from Q355B low-alloy high-strength structural
Q355B welded H beam Lire la suite »
Home » GI/GL/Tin » T3 SPTE Tin Sheet T3 SPTE Tin Sheet Width: 300-1500mm Thickness: 0.15–0.50 mm Coating: 1.1/1.1, 2.8/2.8, 5.6/5.6 g/m² Product Introduce T3 SPTE Tin Sheet is a cold-rolled steel sheet that has undergone tin coating treatment and is in a T3 hardness state. T3 represents the tempering (hardness) grade of the material. In
T3 SPTE Tin Sheet Lire la suite »
Home » PPGI/PPGL » Ral 5010 PPGI steel Ral 5010 PPGI steel Width: 600-1500mm or customizable Thickness: 0.12 – 1.5mm Coating: Polyester, SMP, PVDF Product Introduce RAL 5010 PPGI steel refers to a pre-coated product with a RAL 5010 (Gentian Blue) color coating applied to a hot-dip galvanized or electro-galvanized steel coil substrate. RAL 5010
Ral 5010 PPGI steel Lire la suite »
Home » Carbon Alloy Steel » I Beam Steel I Beam Steel Length: 6m, 12m, or as required Height: 100mm – 630mm Standard: EN, GB/T Product Introduce I beam steel, also known as an I section or universal beam, is a structural steel profile shaped like the letter “I”. It is widely used in construction
Home » Carbon Alloy Steel » U-shaped steel sheet piles U-shaped steel sheet piles Length: 6m, 9m, 12m, or as required Material: Q235, Q345, Q345B, SY390, etc Common models: Larsen III, Larsen IV Product Introduce Steel sheet pile is a reusable steel sheet structural component with a locking mouth. By connecting with each other through
U-shaped steel sheet piles Lire la suite »
H-beam vs I-beam are the two most common types of structural steel, often compared together by designers, engineering contractors, and project owners. Although the two have similar appearances, there are significant differences in cross-sectional shape, mechanical properties, load-bearing capacity, and application scenarios. Section shape: The fundamental difference between H-beam vs I-beam The cross-sectional shape of
H-Beam Vs I-Beam: What’s the Difference? Lire la suite »
Erreur : Formulaire de contact non trouvé !
English English 
Русский
العربية
Español
Français
فارسی
繁體中文
O‘zbekcha
Tiếng Việt
Українська
Türkçe
ไทย
日本語
한국어
简体中文