Products | Wanzhi Group

S355 hot rolled steel plate

S355 hot rolled steel plate Thickness: 1.2-15mm, or as required Width: 600-2000mm Standard: GB/T, ASTM, EN, JIS Product Introduce S355 is a high-strength low-alloy structural steel (HSLA steel) produced through a hot-rolling process. Where: S stands for Structural Steel 355 represents a minimum yield strength of 355 MPa Simply put, S355 is stronger than ordinary structural steel while maintaining good workability. This means: Thinner steel plates achieving the same load-bearing capacity Lighter structural weight Lower material procurement costs Higher engineering safety factor For large steel structure projects, reducing steel usage by just 10%-20% can potentially save tens or even hundreds of thousands of dollars in costs. As a high-strength structural […]

S355 hot rolled steel plate 続きを読む »

S350GD Galvanized Steel Coil

GI/GL/Tin, 製品 / wanzhigroup

S350GD Galvanized Steel Coil Width: 600-1500mm or customizable Thickness: 0.5 – 4.0mm Coating: 30g/m² – 275g/m² Product Introduce S350GD is a high-strength structural grade hot-dip galvanized steel grade named according to the European standard EN 10346, designed specifically for cold formed structural applications. S350GD galvanized steel coil is one of the most widely used structural grade hot-dip galvanized steels under the EN 10346 standard. It achieves a good balance between cold forming performance, load-bearing capacity, and corrosion resistance, making it a cost-effective material selection solution in engineering fields such as light steel structures, building purlins, and photovoltaic brackets. The meanings of each part in the S350GD grade are as follows:

S350GD Galvanized Steel Coil 続きを読む »

DX51D+Z zinc free flower galvanized sheet

GI/GL/Tin, 製品 / wanzhigroup

DX51D+Z zinc free flower galvanized sheet Width: 600-1250mm or customizable Thickness: 0.12 – 2.2mm Coating: 60g/m² – 275g/m² Product Introduce The DX51D+Z zinc free flower galvanized sheet refers to the DX51D+Z Zero Spangle hot-dip galvanized steel sheet/coil, which is a cold-formed hot-dip galvanized steel material that complies with the European standard EN 10346. The surface is specially controlled to give the galvanized layer a zinc free or extremely fine zinc flower appearance, with a smoother and more beautiful surface, suitable for spraying, home appliances, and high-end construction purposes. The meaning of DX51D+Z D=Flat steel product for cold forming X=No specific strength requirement 51=Forming grade D=Hot dip galvanized +Z=Zinc coating (pure

DX51D+Z zinc free flower galvanized sheet 続きを読む »

SGCC Galvanized Steel Sheet/Coil

GI/GL/Tin, 製品 / wanzhigroup

SGCC Galvanized Steel Sheet/Coil Width: 600-1250mm or customizable Thickness: 0.12 – 3.2mm Coating: 30g/m² – 275g/m² Product Introduce SGCC is the designation of hot-dip galvanized steel plates in the Japanese Industrial Standard JIS G3302. Simply put, SGCC stands for “cold-rolled commercial grade hot-dip galvanized steel“. It is a universal galvanized steel plate made from ordinary carbon structural steel as the substrate, through cold rolling and hot-dip galvanizing processes. The surface is covered with a uniform zinc layer, providing excellent corrosion resistance. Letter Full name S Steel G Galvanized (hot-dip galvanized) C Cold rolled substrate C Commercial Grade (General Purpose) Product Parameters According to JIS G3302 standard, the common specification range

SGCC Galvanized Steel Sheet/Coil 続きを読む »

Zinc-Coated Steel

GI/GL/Tin, 製品 / wanzhigroup

Zinc-Coated Steel Width: 600-1500mm or customizable Thickness: 0.12 – 1.2mm Spangle: Zero, Regular, Small, Big Product Introduce Zinc-coated steel (galvanized steel) is a composite material that enhances rust resistance by covering the surface of steel with a layer of zinc. This combination of “steel bottom+zinc layer” not only retains the strength of the steel itself, but also greatly extends the service life of the material by utilizing the sacrificial anodic protection effect of zinc. Product Parameters Item Parameters Products name Zinc-Coated Steel Grade SGCC/SGCH/DX51D/DX52D/DX53D Certificates ISO9001-2008,SGS,BV Thickness 0.12mm~1.2mm Width 600-1500 mm Coil Weight 3-8 tons zinc coating 30 ~ 275g/m² Surface treatment Hot-dip galvanizing (HDG): Molten zinc (443°C) forms a

Zinc-Coated Steel 続きを読む »

Cold Rolled Grain Oriented Electrical Steel

カーボン合金鋼, 製品 / wanzhigroup

Cold Rolled Grain Oriented Electrical Steel Thickness: 0.23 mm, 0.27 mm, 0.30 mm, 0.35 mm, or as required Width: 750 mm, 900 mm, 1000 mm, etc. Standard: GB/T, ASTM, EN, JIS Product Introduce Cold Rolled Grain Oriented Electrical Steel, abbreviated as CRGO, also known as oriented silicon steel or transformer silicon steel, is a highly specialized soft magnetic alloy. After special processing, its grains are highly uniformly arranged in the rolling direction, thereby obtaining ultimate magnetic properties in a specific direction. It is a high-end electrical steel material with highly directional magnetic properties It is mainly used for power transformers, distribution transformers, reactors, and iron cores of large power equipment.

Cold Rolled Grain Oriented Electrical Steel 続きを読む »

Aluminium Composite Panel-ACP-Aluminum-Sheet-with-Decorative-Wall-Panels-Aluminum Composite Material (ACM)

ACM Aluminum Composite Panel

Composite panel, 製品 / wanzhigroup

ACM Aluminum Composite Panel Aluminum layer: 0.06-0.5mm Thickness: 3mm, 4mm, 6mm (as requirement) Color: RAL Color or customer’s requirement Product Introduce Aluminum Composite Panel (ACP)， Also known as aluminum composite material (ACM), it is a new type of building decoration material composed of two layers of aluminum panels and a central core material. In the international market, ACP is more inclined towards ordinary PE aluminum-plastic panels, while ACM is more inclined towards building grade and fire-resistant products. Its basic structure: Surface layer: coated aluminum plate (PVDF, PE, etc.) Core layer: Polyethylene (PE) or flame-retardant mineral core material (FR) Bottom layer: aluminum plate Back: Anti corrosion coating Product Specifications Item Parameters Products

ACM Aluminum Composite Panel 続きを読む »

Q355 H-Section steel manufacturer direct sales, quality first

Hot rolled H-Section steel

カーボン合金鋼, 製品 / wanzhigroup

Hot rolled H-Section steel Length: 6m, 12m, or as required Material: Q235B, Q355B, A36, A992, A572 Gr.50, etc Standard: GB/T, ASTM, EN, JIS Product Introduce Hot rolled H-beam is an economical structural steel profile with wide flanges, high lateral stiffness, and strong bending resistance produced through hot rolling technology. H-Section steel cross-sectional shape resembles the letter “H” and is named after it. The wing flange and thick web plate give it excellent strength, stability, and load-bearing capacity. Its cross-sectional modulus is 5% -10% higher than that of ordinary I-beams, and it can save 10% -15% of metal under the same bearing conditions Compared with traditional I-beams, H-beams have: A wider

Hot rolled H-Section steel 続きを読む »

Q355B welded H beam

カーボン合金鋼, 製品 / wanzhigroup

Q355B welded H beam length: 1m ~ 12m Thickness: 0.5 ~ 30mm Design Style: Customizable Product Introduce Q355B welded H beam is a type of structural steel beam manufactured by welding steel plates into an “H” shape. It is made from Q355B low-alloy high-strength structural steel, which offers excellent strength, weldability, and toughness for construction and industrial applications. Compared with hot rolled H beams, welded H beams can be produced in customized sizes and larger dimensions, making them ideal for heavy steel structures and long-span projects. What Does “Q355B” Mean? Q355B is equivalent to: Unlike hot rolled H beams, welded H beams are: Product Parameters Item Parameters Length Q355B welded

Q355B welded H beam 続きを読む »

T3 SPTE Tin Sheet

GI/GL/Tin, 製品 / wanzhigroup

T3 SPTE Tin Sheet Width: 300-1500mm Thickness: 0.15–0.50 mm Coating: 1.1/1.1, 2.8/2.8, 5.6/5.6 g/m² Product Introduce T3 SPTE Tin Sheet is a cold-rolled steel sheet that has undergone tin coating treatment and is in a T3 hardness state. T3 represents the tempering (hardness) grade of the material. In the standard for tinplate, the larger the number from T1 to T5, the higher the hardness and strength of the material, but the processing formability will correspondingly decrease. SPTE, also known as Steel Plated Tin or Electrolytic, is a cold-rolled low-carbon steel sheet with double-sided electroplating of commercial pure tin. It refers to a product in which a layer of commercial pure tin

T3 SPTE Tin Sheet 続きを読む »