---

A galvanized corrugated sheet is a profiled steel sheet made from hot-dip galvanized steel coil that has been roll-formed into a series of parallel ridges and grooves (corrugations). The zinc coating protects the underlying steel from rust and corrosion, while the corrugated profile significantly increases the sheet’s structural strength and load-bearing capacity compared to a flat sheet of the same thickness.

Galvanized corrugated sheets are one of the most widely used roofing and cladding materials in construction worldwide. They offer an unbeatable combination of corrosion resistance, mechanical strength, lightweight design, and cost-effectiveness, making them the go-to choice for industrial, commercial, agricultural, and residential building projects.

The zinc coating on a galvanized corrugated sheet is applied through hot-dip galvanizing, which involves four key steps:

1. Cleaning — The cold-rolled steel substrate is degreased to remove surface oils and contaminants, ensuring proper zinc adhesion.
2. Pickling — Acid treatment (hydrochloric or sulfuric acid) removes surface oxides and rust, leaving a clean steel surface.
3. Fluxing — A zinc ammonium chloride flux is applied to prevent re-oxidation and improve the wetting of molten zinc on the steel surface.
4. Hot-Dip Galvanizing — The pre-treated steel sheet is immersed in molten zinc at 450–460°C, forming a metallurgical bond between the zinc and steel. This creates iron-zinc alloy layers and a pure zinc top layer, typically 30–275 g/m² thick.

The zinc coating provides two types of protection:

• Barrier protection — The zinc layer physically seals the steel from moisture and oxygen.
• Sacrificial (cathodic) protection — Even if the coating is scratched or damaged, the zinc corrodes preferentially, protecting the exposed steel beneath.

After galvanizing, the flat steel sheet passes through a roll-forming machine with profiled rollers that shape it into corrugations. The ridge height, groove spacing, and wave pattern can be customized to meet different structural and drainage requirements. This corrugation process increases the sheet’s moment of inertia, enabling it to resist bending, buckling, and impact loads far more effectively than a flat sheet.

Different markets use different steel grade designations for galvanized corrugated sheets. The table below shows equivalent grades across Chinese, Japanese, European, and American standards:

Chinese Standard (GB)	Japanese (JIS)	European (EN)	American (ASTM)	طلب
DX51D+Z	SGCC	DX51D+Z	CS Type A/B/C	General forming, roofing
DX52D+Z	SGCD1	DX52D+Z	CS Type A	Deep drawing
DX53D+Z	SGCD2/SGCD3	DX53D+Z	DDS	Extra deep drawing
DX54D+Z	SGCD4	DX54D+Z	EDDS	Super deep drawing
S220GD+Z	SGC340	S220GD+Z	SS 220	Structural use
S250GD+Z	—	S250GD+Z	SS 250	Structural use
S280GD+Z	—	S280GD+Z	SS 280	Structural use
S320GD+Z	—	S320GD+Z	SS 320	Structural use
S350GD+Z	SGC400	S350GD+Z	SS 340/550	High-strength structural
S550GD+Z	SGC510	S550GD+Z	SS 550	Ultra-high-strength structural

Choosing the right zinc coating weight is critical for ensuring the service life of your galvanized corrugated sheet in different environments:

Environment	Recommended Zinc Coating	Service Life (approx.)
Indoor use (dry)	Z60–Z100 (60–100 g/m²)	15–20 years
Suburban/rural areas	Z120–Z180 (120–180 g/m²)	10–15 years
Urban or industrial areas	Z200–Z275 (200–275 g/m²)	15–25 years
Coastal/marine environments	Z275+ (275 g/m² or thicker)	8–15 years
Extreme corrosion (chemical plants)	Z275 + paint coating	20+ years

Treatment	Code	Features
Chromic acid treatment	C	Good corrosion resistance, suitable for bare state
Chromic acid + oiling	S	Enhanced corrosion resistance for transport
Phosphating (sealed)	P	Good paint adhesion, moderate corrosion resistance
Phosphating (sealed) + oiling	Q	Corrosion resistance + paint adhesion + rust prevention
Anti-fingerprint	AFP	Prevents fingerprint marks, clean appearance
Oiling	O	Prevents rust during transport and storage
No treatment (dry)	M	Suitable for immediate painting

The corrugation profile affects the sheet’s strength, water drainage efficiency, and aesthetic appearance. Common profiles include:

Profile Type	Wave Height	Features	Best For
Sinusoidal (Wave)	10–25 mm	Classic wave pattern, excellent water runoff, lowest cost	General roofing, agricultural buildings
Trapezoidal (Box)	20–55 mm	Higher load-bearing capacity, modern appearance	Industrial roofing, large-span structures
IBR (Inverted Box Rib)	30–34 mm	Wider coverage, fewer overlaps, faster installation	Commercial and industrial roofing
Corrugated Tile	20–30 mm	Mimics traditional ceramic tiles	Residential roofing, decorative facades

Common corrugation model numbers include YX25-210-840, YX35-125-750, YX15-225-900, and YX28-207-828/1035, where the numbers represent wave height, pitch, and effective width respectively.

Spangle Type	Appearance	طلب
Regular spangle	Visible crystalline zinc pattern	General industrial use, roofing
Minimized spangle	Smaller, less visible pattern	Painting substrate, architectural
Zero spangle	Smooth, uniform surface	Appliances, automotive, painting
Big spangle	Large decorative crystalline pattern	Decorative applications, traditional roofing

The zinc coating provides both barrier and sacrificial protection. In general atmospheric conditions, a Z120 coating (120 g/m²) can protect the steel substrate for 10–15 years without significant rust. In harsh environments, Z275 coatings extend service life to 20+ years.

2. High Strength-to-Weight Ratio

The corrugation process increases the sheet’s moment of inertia without adding material weight. A 0.5 mm corrugated sheet can achieve load-bearing performance comparable to a much thicker flat sheet, reducing both material cost and structural load on the building.

3. Fast and Easy Installation

Galvanized corrugated sheets are lightweight (approximately 4–12 kg/m² depending on thickness), easy to cut on-site, and simple to fasten with screws or nails. This significantly reduces installation time and labor costs compared to concrete or ceramic roofing.

4. Excellent Weather Resistance

The corrugated profile channels rainwater efficiently, preventing water pooling and leakage. The sheets withstand strong winds, heavy rain, snow loads, and hail, making them suitable for extreme climate zones.

5. Cost-Effective

Compared to stainless steel, aluminum, or traditional roofing materials, galvanized corrugated sheets offer the lowest cost per square meter of coverage while maintaining adequate durability for most applications. The long service life and minimal maintenance requirements further reduce lifecycle costs.

6. Fire Resistance

Steel is inherently non-combustible. Galvanized corrugated sheets will not ignite, spread flames, or contribute fuel to a fire, making them ideal for buildings with strict fire safety requirements.

7. 100% Recyclable

At the end of their service life, galvanized steel sheets can be fully recycled without loss of quality. This makes them an environmentally responsible choice that supports green building certifications such as lewd.

8. Customizable

Galvanized corrugated sheets can be customized in thickness, width, length, corrugation profile, zinc coating weight, and surface treatment to meet specific project requirements.

Wall Cladding

Galvanized corrugated sheets are widely used as exterior wall cladding for industrial buildings, providing both weather protection and structural rigidity. They can be installed vertically or horizontally and painted in various colors for aesthetic appeal.

Agricultural Buildings

Farms, ranches, and agricultural facilities benefit from the corrosion resistance of galvanized corrugated sheets against animal waste, fertilizers, and humidity. They are commonly used for barn roofs, stable walls, silo covers, and poultry house enclosures.

Industrial Structures

Factories, power plants, and chemical processing facilities use galvanized corrugated sheets for roofing, wall panels, partitions, and equipment enclosures. For highly corrosive environments, heavier zinc coatings (Z275) or additional paint coatings are recommended.

Temporary and Modular Structures

The lightweight and easy-to-install nature of galvanized corrugated sheets makes them ideal for temporary construction site offices, disaster relief shelters, modular housing, and event structures that require rapid assembly and disassembly.

Fencing and Partitioning

Galvanized corrugated sheets are sometimes used as fencing panels for construction sites, industrial yards, and agricultural enclosures, providing security and wind protection.

Selecting the right specifications for your project involves considering several factors:

1. Environment and Climate

• Dry, inland areas: Z60–Z120 zinc coating is sufficient
• Humid or urban areas: Z140–Z200 recommended
• Coastal or industrial zones: Z275 minimum, consider additional paint coating
• High wind areas: Choose trapezoidal profiles with higher wave height for better wind resistance

2. Structural Requirements

• Roof slope: Low-slope roofs need deeper corrugations for better water drainage
• Span distance: Longer spans require thicker sheets (0.5 mm+) and higher wave profiles
• Snow load: Areas with heavy snowfall need structural grades (S350GD+) and thicker gauges

3. Service Life Expectations

• Temporary structures (1–5 years): 0.12–0.3 mm, Z40–Z60
• Standard buildings (10–15 years): 0.3–0.5 mm, Z120–Z180
• Long-term buildings (20+ years): 0.5–0.8 mm, Z200–Z275

4. Budget Constraints

• Thinner sheets with lower zinc coatings are more affordable but have shorter service lives
• Investing in heavier zinc coatings upfront often reduces total lifecycle cost by minimizing replacement and maintenance

Wanzhi Group has been supplying steel products to global customers since 2011. With over 15 years of foreign trade experience and a multilingual sales team, we serve customers in 120+ countries across Asia, Europe, Africa, and Latin America.

Integrated Production and Trading

We operate production bases in Shandong (Binzhou) و Tianjin (Jinghai), equipped with 3 coating production lines and 2 pipe production lines. Our combined annual capacity exceeds 600,000 tons, ensuring stable supply and competitive pricing.

Certified Quality

All our products comply with international standards and carry the following certifications:

• ISO 9001 — Quality Management System
• ISO 14001 — Environmental Management System
• ISO 45001 — Occupational Health and Safety
• CE — European Conformity
• SGS — Third-party inspection accepted

Our in-house quality control laboratory includes salt spray testing, UV aging chambers, universal testing machines, Rockwell hardness testers, and coating thickness gauges, ensuring every batch meets specification.

Custom Solutions

We provide custom processing services including:

• Cutting to specified lengths
• Slitting and leveling
• Roll forming to custom corrugation profiles
• Surface treatments (anti-fingerprint, oiled, chromated)
• Custom packaging and labeling

Fast Delivery

• Stock items: 5–7 days
• Custom production: 15–25 days after deposit
• Global logistics: Designated freight forwarders with competitive shipping rates

Ready to source high-quality galvanized corrugated sheets for your project? Wanzhi Group provides:

• Competitive factory-direct pricing
• Custom specifications tailored to your project
• ISO9001/CE/SGS certified quality
• Fast global shipping to 120+ countries

Contact us today:

• Email: info04@wanzhisteel.com
• WhatsApp: +86 18736065220
• Website: wanzhisteels.com

Our experienced sales team will respond within 24 hours with a detailed quotation, including product specifications, pricing, and delivery timeline.

• صفائح مموجة PPGI — Color-coated corrugated roofing sheet
• لفائف الفولاذ المجلفن — SGCC galvanized steel coil for corrugation
• لفائف الصلب PPGI — Pre-painted galvanized steel coil
• Zinc-Coated Steel — Zinc-coated steel products
• Z275 Galvanized Steel Sheet — Heavy zinc coating sheet
• All Products — View our complete steel product catalog

العلامات الساخنة: مجلفن steel sheet, galvanized corrugated roofing sheet, corrugated galvanized steel sheet, GI corrugated sheet, galvanized iron corrugated sheet, corrugated galvanized iron sheet, factory price, for sale